External Transmitter not working.

Here is the place for all Hardware and Firmware related questions

Moderator: marcus

External Transmitter not working.

Postby armonis » Thu 5. Jan 2012, 08:45

Dear IR Trans,

We have an Ethernet IR Trans and we have removed the red jumper behind the receiver as described in the manual. We also selected only the External receiver on "Device Status".
We have connected the stereo mini jack on the the slot next to the on board receiver and the status LED blinks green once when connected.
We try to send IR signals but we still see the internal LEDs blinking (we use our phone's camera). The External does not still work.
Is there something we have not done correctly?
Best regards,
N. Armonis
Hellas Digital
armonis
 
Posts: 5
Joined: Tue 3. Jan 2012, 20:44

Re: External Transmitter not working.

Postby IRTrans » Thu 5. Jan 2012, 08:47

Yes, here you have connected an external RECEIVER and not an external transmitter.

IRTrans
IRTrans
Administrator
 
Posts: 2115
Joined: Mon 21. Apr 2008, 23:32

Re: External Transmitter not working.

Postby armonis » Thu 5. Jan 2012, 08:58

Sounds clear to me...

We will purchase immediately the transmitter along with a 4 channel IR Trans Ethernet.

Thanks.
armonis
 
Posts: 5
Joined: Tue 3. Jan 2012, 20:44


Return to Hardware

Who is online

Users browsing this forum: No registered users and 9 guests

cron