Page 1 of 1

External Transmitter not working.

PostPosted: Thu 5. Jan 2012, 08:45
by armonis
Dear IR Trans,

We have an Ethernet IR Trans and we have removed the red jumper behind the receiver as described in the manual. We also selected only the External receiver on "Device Status".
We have connected the stereo mini jack on the the slot next to the on board receiver and the status LED blinks green once when connected.
We try to send IR signals but we still see the internal LEDs blinking (we use our phone's camera). The External does not still work.
Is there something we have not done correctly?
Best regards,
N. Armonis
Hellas Digital

Re: External Transmitter not working.

PostPosted: Thu 5. Jan 2012, 08:47
by IRTrans
Yes, here you have connected an external RECEIVER and not an external transmitter.

IRTrans

Re: External Transmitter not working.

PostPosted: Thu 5. Jan 2012, 08:58
by armonis
Sounds clear to me...

We will purchase immediately the transmitter along with a 4 channel IR Trans Ethernet.

Thanks.