Page 1 of 1
RS232 control with IRTrans LAN Controller XL
Posted:
Tue 6. Jul 2010, 18:23
by trinidex
I have the IRTrans LAN Controller XL and the feature list shows "RS232 interface to control external devices" which is what I would like to do.
I have the several manuals that came with the LAN Controller XL but cannot find how to control external devices with RS232.
Grateful for help.
Thanks
Re: RS232 control with IRTrans LAN Controller XL
Posted:
Tue 6. Jul 2010, 20:28
by IRTrans
The easiest way is to define RS232 sequences using the GUI client (Learn Dialog - Add RS232 code).
These RS232 codes can then be sent the same way as IR Codes.
IRTrans
Re: RS232 control with IRTrans LAN Controller XL
Posted:
Tue 6. Jul 2010, 21:07
by trinidex
Thank you.
Do I connect the RS232 controllable device to the RS232 port on the front of the Lan Controller XL?
Is that a standard RS232 pinout?
Thanks again
Re: RS232 control with IRTrans LAN Controller XL
Posted:
Tue 6. Jul 2010, 21:25
by IRTrans
Hi,
yes, correct. You will need to use the front RS232 connector.
It has got the same Pin-Out as a PC (however it is a female connector).
IRTrans
Re: RS232 control with IRTrans LAN Controller XL
Posted:
Wed 7. Jul 2010, 18:45
by trinidex
Thank you for your help.