Irtans USB Module .rm file compatibility with LIRC .conf
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
On one side, I have an IR Trans USB module connected to my PC (working with Windows XP) that I want to use to learn IR codes from my own remote control.
I’ve done one trial with the IR Trans module (in the learn normal mode) to acquire some codes that you can find herafter (.rm example)
On the other side, I have an application on an Android phone (nammed IRDroid) able to generate IR codes with an external output audio jack adapter.
But this application only support the file format used by the LIRC (as an example of the format, I've joined a Sony file.conf taken from http://lirc.sourceforge.net/remotes/).
[b]Unfortunately, I don’t know how to transform the .rm (IRTrans) file format towards the .conf (LIRC) format.
The aim for me is to use IR codes acquired from I Trans as an input to my Android application
Could you indicate me how to proceed ?
On your web site you give some information concerning WinLIRC and IR Trans compatibility but it telles nothing about files compatibility?
“WinLIRC. The IRTrans System is compatible with LIRC and WinLIRC. That means all clients with LIRC or WinLIRC interfaces can be used with the IRTrans system. LIRC or WinLIRC do not need to be installed. As the LIRC / WinLIRC interface is part of the IRTrans server no additional software is needed.”
PS: I’ve launched WinLIRC but I didn’t find any dll in the configuration menu concerning IRtrans module
Thanks,
Michel
--------------------------------------------------------------------------------------------------------------------------------
.rm example:
[REMOTE]
[NAME]essai_mv
[TIMING]
[0][N]5[1]8920 4496[2]536 576[3]544 1680[4]8928 2256[5]544 42192[RC]1[RP]0[FREQ]38[FREQ-MEAS][SB]
[1][N]3[1]8928 4488[2]544 568[3]544 1688[RC]1[RP]0[FREQ]38[FREQ-MEAS][SB]
[COMMANDS]
[OK][T]0[D]S01100001011100001010100001010111320
[Menu][T]0[D]S01100001011100000010100011010111320
[fleche basse][T]1[D]S011000010111000000110000110011110
[Retour][T]0[D]S01100001011100000101000010101111320
[stop][T]0[D]S01100001011100000010010011011011320
[fleche haute][T]1[D]S011000010111000011010000001011110
[OFF][T]0[D]S01100001011100000100100010110111320
_____________________
Sony LIRC .conf example
_____________________
#
# this config file was automatically generated
# using lirc-0.8.6(default) on Sun Sep 19 10:37:21 2010
#
# contributed by Angelo (Italy)
#
# brand: Sony
# model no. of remote control: RM-ED035
# devices being controlled by this remote: Sony Bravias year 2010 (EX-50x for example, and many others)
#
begin remote
name Sony_RM-ED035
bits 12
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
header 2490 559
one 1252 539
zero 658 539
gap 44920
toggle_bit_mask 0x0
begin codes
INPUT 0xA50
STANDBY 0xA90
EXIT 0xC70
I+ 0x5D0
HOME 0x070
OK 0xA70
UP 0x2F0
RIGHT 0xCD0
DOWN 0xAF0
LEFT 0x2D0
1 0x010
2 0x810
3 0x410
4 0xC10
5 0x210
6 0xA10
7 0x610
8 0xE10
9 0x110
TELETEXT 0xFD0
0 0x910
MUTE 0x290
VOLUMEUP 0x490
VOLUMEDOWN 0xC90
PROGUP 0x090
PROGDOWN 0x890
AUDIO 0xE90
BACK_STANDBY 0xA90
end codes
end remote
I’ve done one trial with the IR Trans module (in the learn normal mode) to acquire some codes that you can find herafter (.rm example)
On the other side, I have an application on an Android phone (nammed IRDroid) able to generate IR codes with an external output audio jack adapter.
But this application only support the file format used by the LIRC (as an example of the format, I've joined a Sony file.conf taken from http://lirc.sourceforge.net/remotes/).
[b]Unfortunately, I don’t know how to transform the .rm (IRTrans) file format towards the .conf (LIRC) format.
The aim for me is to use IR codes acquired from I Trans as an input to my Android application
Could you indicate me how to proceed ?
On your web site you give some information concerning WinLIRC and IR Trans compatibility but it telles nothing about files compatibility?
“WinLIRC. The IRTrans System is compatible with LIRC and WinLIRC. That means all clients with LIRC or WinLIRC interfaces can be used with the IRTrans system. LIRC or WinLIRC do not need to be installed. As the LIRC / WinLIRC interface is part of the IRTrans server no additional software is needed.”
PS: I’ve launched WinLIRC but I didn’t find any dll in the configuration menu concerning IRtrans module
Thanks,
Michel
--------------------------------------------------------------------------------------------------------------------------------
.rm example:
[REMOTE]
[NAME]essai_mv
[TIMING]
[0][N]5[1]8920 4496[2]536 576[3]544 1680[4]8928 2256[5]544 42192[RC]1[RP]0[FREQ]38[FREQ-MEAS][SB]
[1][N]3[1]8928 4488[2]544 568[3]544 1688[RC]1[RP]0[FREQ]38[FREQ-MEAS][SB]
[COMMANDS]
[OK][T]0[D]S01100001011100001010100001010111320
[Menu][T]0[D]S01100001011100000010100011010111320
[fleche basse][T]1[D]S011000010111000000110000110011110
[Retour][T]0[D]S01100001011100000101000010101111320
[stop][T]0[D]S01100001011100000010010011011011320
[fleche haute][T]1[D]S011000010111000011010000001011110
[OFF][T]0[D]S01100001011100000100100010110111320
_____________________
Sony LIRC .conf example
_____________________
#
# this config file was automatically generated
# using lirc-0.8.6(default) on Sun Sep 19 10:37:21 2010
#
# contributed by Angelo (Italy)
#
# brand: Sony
# model no. of remote control: RM-ED035
# devices being controlled by this remote: Sony Bravias year 2010 (EX-50x for example, and many others)
#
begin remote
name Sony_RM-ED035
bits 12
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
header 2490 559
one 1252 539
zero 658 539
gap 44920
toggle_bit_mask 0x0
begin codes
INPUT 0xA50
STANDBY 0xA90
EXIT 0xC70
I+ 0x5D0
HOME 0x070
OK 0xA70
UP 0x2F0
RIGHT 0xCD0
DOWN 0xAF0
LEFT 0x2D0
1 0x010
2 0x810
3 0x410
4 0xC10
5 0x210
6 0xA10
7 0x610
8 0xE10
9 0x110
TELETEXT 0xFD0
0 0x910
MUTE 0x290
VOLUMEUP 0x490
VOLUMEDOWN 0xC90
PROGUP 0x090
PROGDOWN 0x890
AUDIO 0xE90
BACK_STANDBY 0xA90
end codes
end remote