Sending IR code when code is already in IRDB

[stephane]

Hi,

I have a POE IRTrans. I've uploaded the IR database with some IR codes.

I can send these codes with an HTTP request, for example ; it works fine.
But if I try to send these codes with an IR remote control, I see that the IRTrans receives the command (led blinking green), but no IR code is emitted by the IRTrans.
If I send an IR code which is not in the IR database, I see the led blink red, and the IR code is relayed by the IRTrans.

How can I send an IR code via HTTP and via the remote control ?

Regards,
Stephane

[IRTrans]

Hi,
what exactly do you want to do:

- Send a received IR Code using Self Repeat ? - That works. I just tested it myself.
- Translate the code using the IR Translator ?

Using IR Translation and IR Database at the same time is not possible because both options need totally different memory structures.

IRTrans

[stephane]

Hi,

Self Repeat works fine when IR database is empty, for any IR code. It's my primary use, because my AVR and DVD players are inside a cabinet.

I've tried recently to download some IR codes into IRTrans database. It works fine and I'm able to send IR code through a HTTP command.
But the drawback is that I'm not able to use Self Repeat anymore for these IR codes. When I send one of these IR code (present in database) with a regular remote control, I see IRTrans green LED blink, but not the red one (and of course my AVR is not receiving any IR code).

I'm not using IR Translator.
When I send an IR code, I just want it to be relayed to my devices in the cabinet.
Self Repeat is checked in the configuration pages of my IRTrans.

Stephane

[IRTrans]

That is strange. Yesterday I tried that out myself - self repeat of a command that is in the IRDB works fine with my test device.

Which firmwareversion does your IRTrans have ?

IRTrans

[stephane]

LAN version : L1.06.14
IR version : E5.08.09

[IRTrans]

Well, that is quite old ...

Please send us an Email to support@irtrans.de to get a firmware update.

IRTrans