Page 1 of 1
Ethernet transmit frequencies
Posted:
Tue 28. Jul 2009, 17:01
by mladen.k
Will I be able to transmit all carrier frequencies (10-455kHz) without using PC, with IrTrans ethernet equiped with database and COD-RCV (Universal learning IR receiver - internal)? I understand that it can learn all frequencies, but can ethernet unit send that ir freq. to controll both standard equipment and B&O?
Re: Ethernet transmit frequencies
Posted:
Tue 28. Jul 2009, 17:07
by IRTrans
Hi,
in general the IRTrans device can send all frequencies. However, the range will not be very good when controlling B&O Equipment as the IR Sending
diodes are optimized for standard frequencies. If you want to control both, standard devices and B&O I would suggest using an IRTrans Ethernet HF
device together with the COD-RCV.
IRTrans
Re: Ethernet transmit frequencies
Posted:
Tue 28. Jul 2009, 19:15
by mladen.k
Thank you for fast reply,
Just one more thing, I don't understand well, for IRT-LAN-HF - IRTrans Ethernet Device you suggest, on your page is stated that it is used ONLY for 455kHz Codes, so I don't understand will I be able to controll other devices using standard freq?
Re: Ethernet transmit frequencies
Posted:
Wed 29. Jul 2009, 00:56
by IRTrans
If you combine the HF device with the COD-RCV option you can learn all IR Codes.
Sending of all codes is no problem anyways.
IRTrans