Problem transmitting learned codes

Ethernet specific questions and answers - IRTrans LAN, LAN Controller devices

Moderator: marcus

Problem transmitting learned codes

Postby dominic » Mon 11. Aug 2014, 09:20

Hi,

I have IRTrans PoE, IR VER: E6.10.03 ETH VER: L2.05.10.

first of all, pc program setting is all default. (no editing, no typing)

learn the IR Codes using irtrans PC Software and Send IR Code by Send Dialog is works fine.(air conditioners temp set)

I've uploaded the IR database with some IR codes by 1~3 process
1. Open "Device Database" in the GUI Client
2. Select the remotes I want to upload (Right Mouseclick-Select)
3. Click on "Flash" to upload the codes

I see that the IRTrans receives the command (led blinking green),
but no IR code is saved on flash

send test codes with an HTTP request, it works error, "IR Database not loaded"
also my android application is same error, "IR Database not loaded"

I would like to store the IRDB to the IRTrans Device flash.
What am I doing wrong save process?
dominic
 
Posts: 3
Joined: Thu 7. Aug 2014, 04:49

Re: Problem transmitting learned codes

Postby eric » Mon 11. Aug 2014, 10:30

Hi,

are you sure you have an IRTrans PoE v2.1?
I found an order from late July where your colleague ordered an IRTrans LAN IRDB v3.5. This device has to be flashed via the web interface.

Please check what you have and proceed according to the hardware revision you have.

best regards,

Eric
eric
Administrator
 
Posts: 157
Joined: Mon 22. Oct 2012, 10:05

Re: Problem transmitting learned codes

Postby dominic » Tue 12. Aug 2014, 01:56

you are right
my device is IRTrans LAN IRDB v3.5

flashed via the web interface. it works fine.

Additional question,

IRTrans LAN IRDB v3.5 do not use a pc program to upload IRDB data.
only web interface. Right??

Thank you Eric. Appreciate your help.
Regards,
dominic
dominic
 
Posts: 3
Joined: Thu 7. Aug 2014, 04:49

Re: Problem transmitting learned codes

Postby eric » Tue 12. Aug 2014, 11:03

that's correct - the IRTrans LAN 3.5 does not support the IRDB upload through the IRServer.
eric
Administrator
 
Posts: 157
Joined: Mon 22. Oct 2012, 10:05

Re: Problem transmitting learned codes

Postby dominic » Tue 12. Aug 2014, 11:56

OK. I understand about it

Thank you for providing the requested information.

Regards,
dominic
dominic
 
Posts: 3
Joined: Thu 7. Aug 2014, 04:49


Return to Ethernet

Who is online

Users browsing this forum: No registered users and 8 guests

cron