Hi,
I'm using Kubuntu and I have problems using irclient.
IP adress of the PC : 192.168.0.6
IP adress of the transceiver : 192.168.0.32
Netmask : 255.255.255.0
Here is what I do :
***************************************************************
poire@ubuntu:~/Téléchargements$ sudo ./irserver lan
IRServer Version 6.02.43
[ 0]: IRTrans LAN: IR VER: E6.04.40 ETH VER: L1.07.50 SN: 43950
MAC:00-22-3e-04-00-63 IP Addr: 192.168.0.32
**********************************************************************
***It seems here that the irserver is currently good running***
**********************************************************************
In an other window of the konsole, I do this :
poire@ubuntu:~/Téléchargements$ sudo ./irclient 192.168.0.32
IRTrans ASCII Client Version 6.01.01
1 - Send
2 - Learn
3 - Status
99 - Exit
Select command 2
**Selected Remote: []
1 - Select remote
2 - Learn Timing
3 - Learn Command [Based on timing]
4 - Learn Command [Command with timing]
5 - Learn Command [RAW Data]
99 - Exit
Select command 1
Enter Remote Name: Yamaha
This operation is only supported using the irserver
**************************************************************
When I run the irserver using the loglevel 4 option, everything seems to say that it has no problem. So I don't understand why the irclient software wants me to run it...
I think it's pretty simple, but I don't get it !